| Author |
 Topic  |
|
|
lincoln
49 Posts |
 Posted - 09/21/2004 : 10:50:15 PM
|
The Vision manual lists what channels show up on what rx plugs, for each old Airtronics rx, but it doesn't say what order they come after the timing signal, or whatever it's called. Was thinking of using FMA extreme in my Mantis, since it only needs 5 servos. Will experiment, but maybe there's a trick that won't be obvious from experimenting. Otherwise might have to buy rx or a bunch of adapters to use an old Airtronics rx, if it will fit in old Mantis. Yuck.
Thanks
Lincoln Ross |
|
|
lincoln
49 Posts |
Posted - 09/22/2004 : 9:36:11 PM
|
Just discovered that ATRCS mod, or whatever it's called, not covered in manual, has pos. and neg. shift for ppm rx for 4,5,6,7, and 8 channels (not to mention the PCM). So no problem, even though it looks bad in the manual. Or at least so it seems now, using one servo to check various functions.
Lincoln Ross |
 |
|
| |
Topic |
|
|
|
Vision channel order
Forum Locked
